| Idle Speed Setting |
 |
-
Disconnect idle speed control-air bypass solenoid.
-
With transmission in Neutral or Park, run engine at 2500 rpm/30 seconds.
-
Place automatic transmission in Park, manual transmission in Neutral.
-
Check/adjust idle rpm: Turn the throttle plate stop screw to 600-700 rpm
automatic transmission, 625-750 rpm manual transmission.
-
Engine off reconnect idle speed control-air bypass solenoid, verify the
throttle is not stuck in the bore and linkage not preventing throttle from
closing.
-
Start engine and stabilize for 2 minutes then goose engine and let it return
to idle, lightly depress and release the accelerator. Let engine idle,
if problem exists, refer to COMPUTER ENGINE CONTROLS/DIAGNOSTIC ROUTINES
for other possible causes.
